TOA Electonics A1706 Profesional Mixer Amplifier 60W Excellent condition

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
TOA Electonics A1706 Profesional Mixer Amplifier 60W   Excellent condition

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items on eBay, and to buy.

The A-1700 Series of high-performance mixing-dedicated power amplifiers are ideal for PA applications that value versatility. Specifically designed to satisfy the multi-microphone public address requirements of environments such as places of worship and meeting halls, the A-1700 Series Microphone Mixing Amplifiers focus on operational flexibility as well as advanced functions, proving an ideal cost-effective PA solution.

Power Source 240 V AC, 50/60 Hz
Rated Output 60 W
Power/Current Consumption 150 W (rated output), 60 W (EN60065), under 150 mA (when power switch is OFF)
Frequency Response 50 – 20,000 Hz (3 dB)
Distortion Under 2% at 1 kHz, rated power
Input MIC 1 – 6: -60 dB*, 600 , electronically-balanced, combined type of XLR-3-31 equivalent and phone jack AUX 1 – 2: -20 dB*, 600 , electronically-balanced, combined type of XLR-3-31 equivalent and phone jack (Either MIC 5 or AUX 1, and either MIC 6 or AUX 2 selectable) AUX 3 – 4: -20 dB*, 10 k, unbalanced, RCA pin jack AUX 5: -20 dB*, 10 k, unbalanced, combined type of XLR-3-31 equivalent and phone jack PWR AMP IN: 0 dB*, 600 , unbalanced, RCA pin jack (An equalizer or other signal processor connectable between LINE OUT and PWR AMP IN terminals)
Output REC: 0 dB*, 600 , unbalanced, RCA pin jack
LINE: 0 dB*, 600 , unbalanced, RCA pin jack
SPEAKER SELECTOR: 2 zone, high impedance (100 V line/167 ), individual selector key, M4 screw terminal
DIRECT SPEAKER OUT: High impedance (100 V line/167 ), M4 screw terminal
Low impedance (4 – 16 ), M4 screw terminal (Both Low and High impedance terminals cannot be used at the same time.)
Phantom Power ON or OFF for each MIC1 – 6 with switch setting
S/N Ratio (Band Pass : 20 – 20,000 Hz) Over 100 dB (Master volume: min)
Over 76 dB (Master volume: max)
Over 60 dB (MIC 1 – MIC 4)
Over 53 dB (MIC 5, MIC 6)
Over 76 dB (AUX 1 – AUX 5)
Tone Control Bass: 10 dB at 100 Hz, Treble: 10 dB at 10 kHz
Control Input REMOTE VOLUME: M3 screw terminal
POWER REMOTE: No-voltage make contact input, open voltage: 28 V DC (when the unit’s power is OFF), short-circuit: under 10 mA, M3 screw terminal
Indicator 5 point LED output level meter, Power indicator LED, Zone indicator LED
Operating Temperature -10 to +40
Finish Panel: ABS resin, black, hair line
Case: Steel plate, black
Dimensions 420 (W) 107.7 (H) 367 (D) mm
Weight 9.3 kg
Accessory Power cord, Terminal block cover, Terminal block cover mounting screw

Working perfectly.

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to buy, and to see similar items on eBay

 

 


Category: Sound and Vision:Home Audio and HiFi Separates:Amplifiers and Pre-Amps
Location: Larbert