Technics SU-7700 High Quality Sound Integrated Amplifier in Excellent Condition

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Technics SU-7700 High Quality Sound Integrated Amplifier in Excellent Condition

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items on eBay, and to buy.

Audio DatabaseTechnics SU-770045,800 yen(around the 1976 time)
Description@
The Integrated Amplifier which adopted the sub- termination structure in order to realize straight circuitry. 

The termination is directly linked with the printed circuit board, without using a wire, and an input signal is straight inputted into a circuitry. 
Moreover, the straight transmit is enabled according to a sub- termination layout. 

IC stream composition is adopted as an equalizer circuitry. Circuitry makes the output stage the emitter-follower of the constant current load intensity by making into the first rank the differential amplification of the Current-mirror load intensity from which the operating current with very little noise can be chosen. 
Since the large gain of the first rank is taken, the reduction of a noise level has been realized. 
Moreover, in order to acquire the exact frequency characteristic, the polypropylene capacitor of deflection is used for an equalizer element }2% with the metal film resistor of deflection }1%. 

The first rank of a main-amplifier part constitutes the differential amplifier using the pair transistor of one package, and is operated by the Current-mirror load intensity. High gain is obtained to a low distortion by the first rank, and it has become the offensive to which the negative feedback by NF technology was applied. 
For the power transistor, the mass transistor was used by the complimentary, and a low distortion and low noise-ization are measured to it. 

A protection network-cum-the muting circuit using a relay is carried, and the noise at the time of power-source on/off is stopped. 

The newly developed high-density volume transformer that elaborated the technology on the coil and wound the coil around the small space with high density is adopted as a power-source part. For this reason, a volume bulk density is large and has obtained the efficient high output. Moreover, a regulation is also excellent and leakage flux has the special features, like it is few. A 10,000-micro F electrolytic capacitor is adopted as a capacitor. 
The constant-voltage regulated power supply of }2 power source which used a transistor and zener diode for preamplifier parts is adopted. Furthermore, the common-emitter power source of the first rank differential amplifier of a main amplifier is constant-voltage-ized with zener diode, it supplies, and the stable amplification is enabled. 

The Subsonic Filter using NF loop of the equalizer circuitry is carried. 

Since it has the composition that the selector in sound-recording mode became independent of a tapes monitor, it is also possible to play other sources during dubbing. 

The step type is adopted as a volume 41 point. 

having adopted the newly developed volume as a tone control — the middle point of a thumb — a circuitry — signal circuit blank measure. In this location, a signal circuit serves as only equalizer amplifier and power amplifier, and serves as very simple circuitry. 
The tone control circuit uses NF circuitry of a main amplifier. 

The high light filter is carried. 

A germanium diode is adopted as a rectification and the output Direct-reading power meter which raised the linearity at the time of the Koide power is carried. 

The newly developed high-density 
volume transformer adopted by SU-7700The pair transistor of one packageLow noise equalizer IC
Rating of a modeFormStereo Integrated AmplifierEffective output (both channel)1kHz:70W+70W (4ohms) 
53W+53W (8ohms)20Hz – 20kHz :50W+50W (8ohms)THD0.06%Output bandwidth (both ch(es), 8ohms)8Hz – -55kHz three dBRemains noise0.6mVDumping factor60 (8ohms)Load impedanceMain or Remote: 4ohms – 16ohms 
Main+Remote: 8ohms – 16ohmsInput sensitivity/impedancePhono: 2.5mV / 47kohm 
Tuner, Aux, Tape1, 2:150mV / 47kohmThe Phono maximum input (1kHz, RMS)150mVSN ratio (IHF-A)Phono:78dB 
Tuner, Aux: 97dBFrequency characteristicPhono:RIAA standard curve}0.2dB 
Aux: 5Hz-80kHz+0 -3dBTone controlBass: 50Hz, }12dB 
Treble: 20kHz, }12dBLight filterEQ Subsonic: 30Hz-12dB / oct 
High: 8kHz-6dB / octOutput voltageTape1, 2:150mVPower sourceAC100V, 50/60HzPower consumption122WDimensionsWidth 410x height 140x depth of 315mmWeight7.2kg


If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to buy, and to see similar items on eBay

 

 


Category: Sound and Vision:Home Audio and HiFi Separates:Amplifiers and Pre-Amps
Location: London