If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items on eBay, and to buy.
Technics SE-A1010 + SU-C1010 High-End amplifier in very good condition!
Works perfectly, excellent sound, everything original inside, all the vu-meters panel lights are ok, both items made in Japan.
It is sold with an absolutely new battery included (at first charge)!
Remote control, cables required for operation and original boxes included.
Original pictures! What you see is what you get!
The hi-fi stand is NOT included!
I guarantee very good packaging!
Payment expected in a maximum of 3 days by bank transfer (preferred), or Paypal BUT ONLY ”FOR FRIENDS OR FAMILY”!
Transport to almost all EU countries – without islands – is 29 with tracking number, and can take around 5-15 days to arrive!
Technics SE-A1010Super linearity and super sound quality – MOS Class AA circuit
Audiophile quality TA-KEH II electrolytic capacitors
120w x2 high power output (DIN 4ohms)
Level control on rear panel for gain fine tuning for bi-amp use
Aluminium front panel
Large needle-type power meters
A and/or B speaker selector
Meter light off switch
Headphone jack
Specifications of Technics SE-A1010 Stereo Power Amplifier
20Hz to 20kHz continuous power output
both channels driven : 2 70W (8W)
1kHz continuous power output
both channels driven (THD: 1%) : 2 85W (8W)
2 120W(4W)
63Hz to 12.5kHz continuous power output
both channels driven(THD: 0.7%) : 2 80W (8W)
2 105W(4W)
Total Harmonic Distortion (THD)
rated power at 20Hz to 20kHz : 0.015% (8W)
Intermodulation Distortion
(50Hz : 7kHz = 4 : 1, SMPTE) : 0.007% (8W)
Residual hum and noise : 0.3mV
Damping factor : 70 (8W) and 35 (4W)
Headphones output level / impedance : 540mV / 330W
Load impedance A or B : 4 to 16W (A or B) and 8 to 16W (A & B)
Input sensitivity / impedance : 1V / 20kW @ Normal & Direct
Signal to noise ratio : 115dB (IHF 66), rated power 8W
95dB, rated power 4W
Frequency response : 5Hz to 100kHz (+0dB, -3dB)
20Hz to 20kHz (+0dB, -0.5dB)
Power supply : 230V to 240V AC 50Hz
Power consumption : 280W and 1.6W (standby)
Dimensions
Width 430mm
Height 158mm
Depth 344mm
Weight 10.3 kgTechnics SU-C1010VGCA (Variable Gain Control Amplifier) satisfies new high fidelity demands of DVD audio
Battery Drive Power Supply keeps AC noise out of the signal path
R Core transformer eliminates magnetic flux leakage
Audiophile quality MASTER Series TA-KEH II electrolyte capacitors for high quality sound
Hi-Fi volume control with high quality sound
Aluminium front panel
Technics Remote Control System designed for high sound quality
7-position inputs selectors (CD, DVD-6ch, Tape 1, Tape 2/MD, Tuner, Phono, Aux)
Special outputs for Bi-amp connection
Tape monitor switch
Tone controls at VIA TONE position
Balance control
Muting switch (by remote control)Specifications for the Technics SU-C1010
Input sensitivity / impedance Line 200mV/22k Ohms
Phono 2.5mV/47 ohms
Power Supply AC 230V, 50 Hz
Dimensions Width 430mm
Height 91.5mm
Depth 300mm
Weight 3.8 kg
Made in Japan
This is a private sale. For this reason, warranty, guarantee and redemption are excluded.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to buy, and to see similar items on eBay
Category: Sound and Vision:Home Audio and HiFi Separates:Amplifiers and Pre-Amps
Location: Bucharest