If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items on eBay, and to buy.
Tannoy fx/SFX Av system surround speaker crossover, goodworking orderThis crossover PCB was removed from a Tannoy FX surroundspeaker which had a blown tweeter. The crossover is working fine, as is thebass/mid driver (available on another listing).If you have one of these with a duff PCB, you can replaceit. Heres how:Carefully prise off the front metal grille, working slowlyaround the edges using a sharp-pointed knife or the point of a pair ofcompasses etc. The grille is secured with elastic glue and will come offundamaged if you approach the job in small increments. You will then see thefront baffle. Remove the four screws securing the main driver, the two screwsat the top of the baffle, and the single Philips screw at the back of thespeaker enclosure in a tunnel at the top. You can then separate the front ofthe enclosure from the main body. Theres a small piece of wadding andunderneath is the crossover. Remove the wire clips to the main driver, you will have to cut the wires to the tweeter.. Remove the two smallbrass screws securing the PCB (dontlose the terminals which will fall out of the back). Refit new PCB in reverse order; you will have tosolder or crimp the tweeter wires.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to buy, and to see similar items on eBay
Category: Sound and Vision:Home Audio and HiFi Separates:Speakers and Subwoofers
Location: Prenton