T12 MM-MC Turntable Phono RIAA Preamp preamplifier Headphone amplifier B

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
T12 MM-MC Turntable Phono RIAA Preamp preamplifier Headphone amplifier B

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items on eBay, and to buy.

T12 MM MC Turntable Phono RIAA Preamp preamplifier + Headphone amplifier
Description:PHONO PREAMP + HEADPHONE AMPLIFIER: in (1) componentDUAL FUNCTION VOLUME KNOB: works for both phono + headphone outputsHigh quality components + Full metal casingPrecise equalization to the standard RIAA curve (within +/- 0.5 dB).Support for Moving Magnet (MM) and Moving Coil(MC) cartridges both.Exceptional signal-to-noise ratio and very low distortion. ParametersInput impedance: 47K(MM), 50~100 ohm(MC)Output impedance: 10KOutput Voltage: 1.0VGain (MM, Line-Output): 35dB,(MC, Line Output:40dB)RIAA EQ Curve Accuracy (20-20kHz): +/- 1 dBHeadphone Amp Noise: (Limited by RIAA) -103 dBVHeadphone Amp Output-Z: < 1 ohmHeadphone Amp Output Power: @ 16ohms 100 mW, @ 300 ohms 42 mWDimensions: 98 x 80 x 25mmWeight: 0.6 lbs / 9.3 ozPower Supply: 15VAC, 200mA--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------What's more:It will be better if its GND jack can be really connected to the ground, which can decrease the background noise to a very low level.For MM turntables, please check whether your MM cartridge is the old version. If so. we suggest you to upgrade it as a new version one will bring much better sound.Please make sure that your turntable has a PHONO output. A LINE OUT turntable has a built-in preamp and it won't work well with T12Please keep T12 away from devices that can transfer signal like cellphones and routers.Turntable GND cable must be connect to T12s GND jack.If your MC cart is low impedance and with low voltage output. The sound may will not very loud.T12 best work with the MC cart which is impedance >=100 ohm

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to buy, and to see similar items on eBay

 

 


Category: Sound and Vision:Home Audio and HiFi Separates:Record Players/Turntables
Location: Shenzhon