PIONEER M25 STEREO HIFI AMPLIFIER LEGENDARY VINTAGE FULLY SERVICED

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
PIONEER M25 STEREO HIFI AMPLIFIER LEGENDARY VINTAGE FULLY SERVICED

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items on eBay, and to buy.

Description Item DescriptionPioneer M25 stereo HiFi amplifier in full working order, inspected inside and out and load tests fine. Condition is quite good considering the age, some damage to the paintwork around the base, see photos to confirm. Comes with a UK transformer as this is a Japan import, no other accessories or cables are included.

The performance of amplifier is the stereo power amplifier developed by the basis of the design concept of a “magni-wide power range” that a full power play must be able to be carried out in a low distortion not only over the inside of an audio frequency band but over a super-wide band.

In order to enable the low-distortion full power play in a super-high region, ensemble transistor RET excellent in the high region switching characteristic is developed and adopted.

It carries the large-sized power-source part by the large-sized transformer of a L-R independency, and the capacitor of 22,000 micro Fx4 in order to die and to make it go over sufficient power while super-low-pass one improves a property with DC amplifier.

Even 3W is reproduced in a Class-A operation, and AB class operation is carried out with the output beyond it.
Since the utilization factor of an electrical power is a high efficiency near common B class amplifier, the peek component of a music signal also has allowance and it is being reproduced.

DC amplifier stream composition which eliminated the capacitor of the NFB circuitry is adopted.
Since the low-pass phase shift which the capacitor in a NFB loop generates owing to is canceled by this, stable NFB can be applied.

Since low-impedance-ization inside amplifier is put into practice, width is using the pure-copper board which are 12mm and 1mm in thickness for the grounding from an electrolytic capacitor to a speaker termination.
Moreover, the resistance value has adopted as the hot line from a rectifier to a speaker termination the 14th track (2.03phi Yori line) of the very thick set to one fourth of the conventional thick lines.
Furthermore, the Copper foil of the substrate was doubled in 70micro, and, as for 12mm and thickness, width has connected the collector of two power transistors with the short bar of a 1.2mm pure-copper board.

The mono-construction specification which suppressed the separation between right-and-left channels has attained the high separation.

Gilding excellent in the corrosion resistant is given to the input/output terminal.

Form Stereo power amplifier Circuit system 3 steps of first rank differential current mirror load-intensities Darlington
Parallel push pull pure complimentary OCL circuitry
(AB class operation, DC amplifier stream composition) Effective output (both channel drive) 8ohm : 120W+120W (5Hz – 30kHz, THD 0.01%)
120W+120W (5Hz – 80kHz, THD 0.05%) 4ohm : 120W+120W (5Hz – 20kHz, THD 0.02%) THD
(5Hz – 30kHz, 8ohm) At the time of an effective output: 0.01%
At the time of 60W output: 0.01%
At the time of 1W output: 0.007% Cross modulation distortion
(50Hz : 7kHz = 4:1 or 8ohm) At the time of an effective output: 0.006%
At the time of 60W output: 0.005%
At the time of 1W output: 0.005% Output bandwidth
(IHF, both channel drive) 5Hz – 45kHz (0.01% of distortion)
5Hz – 100kHz (0.05% of distortion) Frequency characteristic 5Hz-200kHz+0 -1dB (at the time of 1W output) Input terminal Input: 1V/50kohm Output-terminal Speaker: 4ohm – 16ohm Dumping factor 100 (20Hz – 20kHz, 8ohm) SN ratio (IHF, A network)
Short circuit 120dB Channel separation 1kHz:105dB
100kHz:70dB The semiconductor used Transistor: 55 pieces
Diode, other:53 piece Supply voltage 100V, 50Hz/60Hz Power consumption 280W (Electrical Appliance and Material Control Law) Maximum electric power consumption 800W Dimensions Width 420x height 153x depth of 370mm Weight 22.5kg

Rewired AudioRewired Audio specialise in the repair of audio electronic equipment ranging from HiFi to pro audio. All Ebay listings have been serviced and repaired where necessary by a professionally qualified and experienced engineer. Terms And Conditions Of Sale Terms And Conditions Of SaleAll communications regarding items listed on the Ebay website must be made via the Ebay messaging system.
Delivery applies to mainland UK and excludes highland and remote areas, please contact for a quote for these regions.
14 Day Returns Your Statutory Rights
If you wish to return goods, you should notify Rewired Audio of your intention to do so within 14 days of the date of receipt by you. You then have an additional 14 days to return the goods from this notification date (goods should be returned within 28 days). We will in such circumstances refund you the cost of your order, including the first delivery to your address; however the cost of the return delivery as stated in the listing will be deducted.
If goods are not returned “as sold” due to handling/use on your part, failure to package the item effectively or with components missing (including packing materials and manuals) we may make a reasonable deduction for this.
All claims of faulty goods will be subject to inspection by a qualified engineer and assessed if the damage was likely to have been preexisting prior to the purchase or has occurred in the delivery of the goods to you. Returns Returns If delivery is delayed by us for more than 7 working days from the delivery date you have the right to contact us and cancel the order. In this case we will happily refund you any money paid for the goods.
A re-delivery will incure a charge if a delivery is not accepted or unable to collect from the courier holding facility within their timescale, otherwise will be treated as a return.
Please check the condition of all products delivered as soon as they are received. Unless evidence to the contrary is produced, it is our policy to treat any damage reported after 24 hours from delivery as having occurred whilst in your possession. Return Fee Return FeeFee of 50
Additional Info Additional InfoWe pride ourselves on customer service. If you have any problems with your item and feel you cant leave us five stars please contact us. Please do not leave negative feedback without giving us the opportunity to rectify any problems.

Collection not available and all payments via Paypal only.

No other articles are included with the item that are not stated in the description or shown in the photos.

Equipment be PAT tested before sale where applicable.

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to buy, and to see similar items on eBay

 

 


Category: Sound and Vision:Home Audio and HiFi Separates:Amplifiers and Pre-Amps
Location: Bedford