If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items on eBay, and to buy.
Only the Dead Fish Follow the Stream A Versatile Piece of Equipment, Demand more.
Very handy 6 channels NAD 906 power amp In full working order, with no issues. can be used to run tri-wirable speakers are to run multiple channels as a part of AV set-up or Multi-Rooms Configuration. Some light cosmetic marks and a small dent in the lid, but as you can see, this is still a really nice example of this hard to find amp. See it yourself, be your own judge, have good look in the pictures before buying it.NAD 906 Multi-Channel Power Amplifier:
The 906 contains six very powerful amplifiers (three separate stereo amplifiers) inside a compact case. Built with the highest quality, high-temperature components and is fully capable of driving 4-ohm loudspeakers for long periods.
Features of the NAD 906 Multi-Channel Power Amplifier
Bridged Monophonic Mode:
Continuous Average Power Output into 8 OHMS
Min. power per channel, 20 Hz – 20 kHz, both channels driven with no more than rated distortion90W
Features of the NAD 906 Multi-Channel Power Amplifier
INPUT:Each of the three independent stereo power amplifiers within the 906 has its own pair of inputs and outputs. If you need fewer than six channels of amplification to see BRIDGING.LINE OUTPUTS:Each input has an accompanying line output which will pass the signal on to another amplifier input or other line-level device.The line outputs are buffered so that a low impedance or short circuit placed across it will not affect the signal at the input.For multi-room installations, the line outputs may be connected to the inputs of another pair of amplifiers within the 906 to provide separate stereo amplification for one or two other zones, each with its own level control.
INPUT LEVEL:The amplifier is equipped with separate input level controls for each channel. Under some circumstances, the level controls may be useful for:Level-matching. Extended volume-control range.Balance correction. SPEAKER CONNECTIONS:This amplifier is equipped with special high current binding-post speaker terminals to handle the highest peak power levels that may occur in the “bridged” mode or with low-impedance loudspeakers. BRIDGING:Each pair of amplifiers with the Model 906 can be “bridged” to form a single amplifier of about three times the power per channel. If you currently need fewer than six channels of amplification, use this feature to increase the available amplifier power.For example, bridging two for the 906’s pairs of amplifiers will yield two mono amplifiers of 90W apiece for the main channels and one stereo amplifier of 30W per channel for a remote set of speakers. SOFT CLIPPING:When an amplifier is driven beyond its specified power output it normally produces “hard clipping” of the signal with harsh distortion and power-supply buzz as the out transistors saturate.The NAD SOFT CLIPPING circuit gently limits the output waveform and minimizes audible distortion when the amplifier is overdriven.SPECIFICATIONSStereo Mode:Continuous Average Power Output into 8 OHMS
(Min. power per channel, 20 Hz – 20 kHz, both channels driven with no more than rated distortion)===> 30 W (14.8 dBW)
———-
Rated Distortion (THD 20 Hz – 20 kHz)===> 0.05%
———-
Clipping Power (maximum continuous power per channel)===> 38 W———-
IHF dynamic headroom at 8 ohms===> +2 dB
———-
IHF dynamic power (maximum short term power per channel)8 ohms4 ohms2 ohms===> 48 W (16.8 dBW)
===> 65 W (18.0 dBW)===> 85 W (19.3 dBW)———-
Input impedance===> R = 10 k ohm
===> C = 470 pF———-
Input sensitivity (for rated power into 8 ohms)===> 1 V
———-
Voltage gain===> x15.5 (23.8 dB)
———-
Frequency response 2 Hz to 100 kHz===> +0, -3dB
———-
Signal/Noise ration, A-weighted 95 dB ref. 1 WTHD (Total Harmonic Distortion, 20 Hz – 20kHz, from 250 mW to rated output)===> <0.05%
———-
SMPTE I.M. (Intermodulation distortion, 60 Hz + 7kHz, 4:1 from 250 mW to rated output) ===> <0.05%
———-
IHF I.M. (CCIF IM distortion, 19 + 20kHz at rated output)===> <0.05%
———-
Bridged (Monophonic) ModeContinuous Average Power Output into 8 OHMS
(Min. power per channel, 20 Hz – 20 kHz, both channels driven with no more than rated distortion)===> 90 W
———-
IHF dynamic headroom at 8 ohms===> +2 dB
———
IHF dynamic power (maximum short term power per channel)8 ohms4 ohms===> 140 W (21.5 dBW)
===> 170 W (22.3 dBW)————-
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to buy, and to see similar items on eBay
Category: Sound and Vision:Home Audio and HiFi Separates:Amplifiers and Pre-Amps
Location: London