AudioValve Sunilda Phono Pre-Amplifier

AudioValve Sunilda Phono Pre-Amplifier

Click here to see similar items on eBay, and to buy.

Welcome to a Pre Loved listing from Elite Audio, the Natural Choice for true two channel high-end Hi Fi in the UK
Welcome to a pre-loved listing for an ex-display AudioValve Sunilda Phono Pre-Amplifier RRP 4250.00
Sundila is a three stage phono-preamplifier, based on 6922 (ECC88) and  12AX7 (ECC83) frame grid tubes, suitable for two MM- and MC-cartridges at the same time. Independently for the two phono inputs, impedance and capacitive load can be set separately and ‘on-the -fly’ while listening. Thus the user can easily configure the unit to match the features of the cartridge by selecting the optimal input resistance and capacitance for each input separately!
Switches in front are found for: MM/MC mode for each input; input 1 or 2; selectors are used to select different resistor and capacitive input loads.
 In MM mode the gain will be 23 dB lower than MC and at a fixed input-impedance of 47 K.
In MC mode the preamp will have 20 dB higher gain and switchable input resistors and condensers. The RIAA de-emphasis is passive and split between the first and second stage. Dividing the RIAA network over two amplification stages lowers the insertion losses of the passive network dramatically. Furthermore, the design holds a total absence of feedback, thus increasing the overall dynamics.
Power supplies are solid state regulated. This is the best way to obtain a low noise and supply line with a very low impedance that will increase the performance in the lower frequency range. The power transformer is housed in a separate aluminum case.
Tech Specs:
Gain: MM 41dB, MC 63dB ( 1Khz )
Input selectable LOAD resistors: 47 R,    100 R,    220 R,    470 R,    1 K,    47 K ( for MM only ) 
Input selectable LOAD capacitors:  0 p,    100 p,     220 p,    470p,    1000p,    0 p
Frequency Response: 20Hz to 65 KHz +/- 3 dB
Subsonic filter roll-off: 20 Hz
Max output amplitude: 14V pk
RIAA accuracy max.: +/- 0,18dB
Distortion: MM 0,24 %, MC 0,32% (1Khz – 2V out)
Noise: MM – 63dB, MC – 73dB
Circuit type: 3 stages single ended, buffered ouputs
RIAA network: passive 
Tubes: 2 x 6922 (6N1P),   2 x 12AX7
mode functions: Stand – by and mute functions
Power supplies: high accuray solid state regulated
Power transformer: outside housed and shielded

Power requirements: 115/230 – 245 Ac – 50/60Hz
Powerconsumption: Watts: 50 VA
Dimensions:   cm, W x H x D :42 * 32 * 14 (same as Eklipse)
Weight:  Kg: 20 kg
Ex-display unit
In excellent condition.
Original box and packing.
Full manufacturers warranty.
Please contact us through eBay for more information.

Click here to buy, and to see similar items on eBay



Category: Sound and Vision:Home Audio and HiFi Separates:Amplifiers and Pre-Amps
Location: Anstruther