If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items on eBay, and to buy.
Audio Valve Sunilda Dual Phono Stage. New price 4,250
Ideally collection or local delivery up to 100 miles. If i deliver millage charged at 40 mile.
This is a stunning as new Audio Valve phono pre amp
It can handle two arms / inputs with each being set separately for specific loadings.
Options include 47, 100, 220, 470, 1k and an MM setting with capacitance from 0, 100, 220, 470 & 820
These can be adjusted on the fly.
The sunlida is a valve phono amp so it brings a wonderful Valve sound to vinyl reproduction. The AudioValve Sunilda is one of the most enjoyably tube-based phono preamps Ive heard. (STEREOFILE Vol.32 No.12)
Mine is the latest model from 2018 which includes all updates up to 2017 as printed in the circuitboard.
All boxes and instructions are included as you would expect.
Details from the web as follows:-
Sundila is a three stage phono-preamplifier, based on 6922 (ECC88) and 12AX7 (ECC83) frame grid tubes, suitable for two MM- and MC-cartridges at the same time. Independently for the two phono inputs, impedance and capacitive load can be set separately and ‘on-the -fly’ while listening. Thus the user can easily configure the unit to match the features of the cartridge by selecting the optimal input resistance and capacitance for each input separately!
Switches in front are found for: MM/MC mode for each input; input 1 or 2; selectors are used to select different resistor and capacitive input loads.
In MM mode the gain will be 23 dB lower than MC and at a fixed input-impedance of 47 K.In MC mode the preamp will have 20 dB higher gain and switchable input resistors and condensers. The RIAA de-emphasis is passive and split between the first and second stage. Dividing the RIAA network over two amplification stages lowers the insertion losses of the passive network dramatically. Furthermore, the design holds a total absence of feedback, thus increasing the overall dynamics.Power supplies are solid state regulated. This is the best way to obtain a low noise and supply line with a very low impedance that will increase the performance in the lower frequency range. The power transformer is housed in a separate aluminum case.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to buy, and to see similar items on eBay
Category: Sound and Vision:Home Audio and HiFi Separates:Amplifiers and Pre-Amps
Location: Stansted