If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items on eBay, and to buy.
I offer: One pair (2 pieces) of 8 inch foam speaker surrounds – these are designed to replace a deteriorated foam surround of the SEAS 21F-WBX woofers so your speakers will work just fine for many more years.Please note the same units have been used in the Impulse H1, Impulse H2, Impulse Ta’us and many more. On the picture you see an Impulse H1 woofer after repair with these surrounds.
Replacing a surround is not that hard – it’s a job that needs your full attention but then everything will work out just fine. If you are in doubt, or have any questions – don’t be afraid to ask. I have re-foamed many speakers myself and will be glad to help you. We have video instructions, manuals, a FAQ and much more online for free. Ask for our URL.
I will pack the surrounds very well so they will reach you just fine. If you have any questions, please ask. Beside these surrounds I also have other sizes available. Check my Ebay shop or contact me. Prices of shipment depend on speed and service. Prices to The USA / Canada are higher because I have to use a more expensive delivery service due to delays with normal airmail. Payment through bank transfer is preferred. Paypal accepted. Shipping within the UK is free.
18cc glue is included.
About the glue:This is water-based glue. Do you have a mailbox on the road (outside your home), and there’s very cold winter weather, the adhesive may freeze. After freezing, the adhesive has become unusable.
General
Special water-based, permanent-flexible adhesive for speaker repair. This bottle contains 18 cc glue.
This glue is suitable for:
Gluing foam surrounds to a speaker cone / frameGluing rubber surrounds to speaker cone / frameGluing fabric surrounds to speaker cone / frameGluing dust-caps to a speaker coneGluing gaskets
This glue is not suitable for gluing spiders and voice coils.
One bottle is enough adhesive for:
– 2 twelve-inch surrounds, or
– 4 eight inch surrounds, or
– 8 four inch surrounds
Storage
This is a water based adhesive. Keep the adhesive in a frost-free room.
Processing
Surface must be flat, dry, and free dust and grease. Apply the glue with brush or roller. The Elastic adhesive dries relatively quickly. If thicker layers are applied, or the adhesive is used with less porous materials , the drying time will be significantly longer. The glue is dry when the color is transparent and the original white is gone. The adhesive can be applied both single- and double-sided. For a higher final strength and longer drying / processing time we recommend to apply the glue doublesided. Remove wet glue immediately with a wet cloth, dried adhesive residue can be removed mechanically. Clean tools immediately after use with water.
Features:
Base: acrylic dispersion
Solids content: about 60%
Density: approximately 1 g / cm
Viscosity about 5000 mPa’s
25 C pH value: 5.5
Min. processing temperature (MFT): 10 C
Wet color: white
Dry color: transparent
Odor: odorless (slightly acidic)
Number of components: 1
Temperature resistance (dried): -40 C to +160 C
Moisture resistance: good (if applied doublesided)
Open time: infinite – lasting tack
Drying time: Depending on the circumstances of 30 minutes to 2 hours.
Consumption: 250 g / m
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to buy, and to see similar items on eBay
Category: Sound and Vision:Home Audio and HiFi Separates:Speakers and Subwoofers
Location: Heerhugowaard